How to enable the plug-in

To enable Dreamweaver Plug-in

1. Launch Dreamweaver, and then open the Manage Sites dialog box under the Site menu.

2. Click New to create a new site.

3. Select Remote Info page of the site definition dialog box, as shown in the following figure.



4. Select Dynamsoft SourceAnywhere for VSS access method and click the Settings button, the Connect To Server dialog box is displayed as shown in the following figure.



5. When you click Option, the Connect To Server with options dialog box will be displayed to set the proxy as shown in the following figure.



6. Click Connect. If connected to server successfully, the Database Settings dialog box will be displayed as shown in the following figure.



7. Enter the site information and click ok to finish the site definition.

8. Your files are now configured for using the Dynamsoft SourceAnywhere for VSS Plug-in.

9. Restart Dreamweaver. Now if you right click context menu on the file/project and select SourceControl, you will see some additional Dynamsoft SourceAnywhere for VSS plug-in functions.

The Dynamsoft SourceAnywhere for VSS plug-in actions are also available from the Menu > SourceControl.

To enable Flash Plug-in

1. If Dynamsoft SourceAnywhere for VSS Plug-in has already been configured in Macromedia Dreamweaver, it is also valid in Macromedia Flash. You can open the Open from Site dialog box under file menu, and connect to the site specified in Macromedia Dreamweaver.
   
2. Similarly, you can also configure Dynamsoft SourceAnywhere for VSS Plug-in in Macromedia Flash. Launch Flash, and then open the Edit Sites dialog box under the File menu.
   
3.  Click New to create a new site.
   
4. Enter the essential information, and choose Dynamsoft SourceAnywhere for VSS in Connection dropdown list.
   
5. You can connect to the site following step 1.