Dev Center
Table of contents

Thanks for downloading Dynamsoft Barcode Reader Package!

Your download will start shortly. If your download does not begin, click here to retry.

Parameter Reference

Parameter Name Description
AllModuleDeviation Sets the module size deviation from the standard barcode module size.
AustralianPostEncodingTable Sets the encoding table used to code the Customer Information Field of Australian Post Customer Barcode.
BarcodeAngleRangeArray Sets the range of angles (in degrees) for barcodes searching.
BarcodeBytesLengthRangeArray Sets the range of barcode bytes length for barcodes searching.
BarcodeBytesRegExPattern Specifies the regular expression pattern of barcode byte characters.
BarcodeColourModes Sets the mode and priority for the barcode colour mode used to process the barcode zone.
BarcodeComplementModes Sets the mode and priority to complement the missing parts in the barcode.
BarcodeFormatIds Sets the formats of the barcode to be read. Barcode formats can be combined.
BarcodeFormatIds_2 Sets the formats of the barcode in BarcodeFormat group 2 to be read. Barcode formats in BarcodeFormat group 2 can be combined.
BarcodeHeightRangeArray Sets the range of barcode heights (in pixels) for barcodes searching.
BarcodeTextLengthRangeArray Sets the range of barcode text length for barcodes searching.
BarcodeTextRegExPattern Specifies the regular expression pattern of barcode characters.
BarcodeWidthRangeArray Sets the range of barcode widths (in pixels) for barcodes searching.
BarcodeZoneBarCountRangeArray Sets the range of bar count of the barcode zone for barcodes searching.
BarcodeZoneMinDistanceToImageBorders Sets the minimum distance (in pixels) between barcode zone and image borders.
BinarizationModes Sets the mode and priority for binarization.
Code128Subset Sets the code 128 subset.
ColourClusteringModes Sets the mode and priority for colour categorization. To be supported.
ColourConversionModes Sets the mode and priority for converting a colour image to a grayscale image.
DeblurLevel Sets the degree of blurriness of the barcode.
DeblurModes Sets the mode and priority for deblurring.
DeformationResistingModes Sets the mode and priority for deformation resisting.
DPMCodeReadingModes Sets the mode and priority for DPM code reading.
ExpectedBarcodesCount Sets the number of barcodes expected to be detected for each image.
FindUnevenModuleBarcode Specifies whether to find barcodes with uneven barcode modules. To be supported.
GrayscaleTransformationModes Sets the mode and priority for the grayscale image conversion.
HeadModuleRatio Sets the module count and module size ratio of the barcode head part.
ImagePreprocessingModes Sets the mode and priority for image preprocessing algorithms.
IntermediateResultSavingMode Sets the mode for saving the intermediate result.
IntermediateResultTypes Sets which types of intermediate results to be kept for further reference. Intermediate result types can be combined.
LocalizationModes Sets the mode and priority for localization algorithms.
MaxAlgorithmThreadCount Sets the number of threads for the image processing algorithm uses to decode barcodes.
MinQuietZoneWidth Sets the minimum width of the barcode quiet zone.
MinRatioOfBarcodeZoneWidthToHeight Sets the minimum ratio (width/height) of the barcode zone.
MinResultConfidence Sets the minimum confidence of the result.
MirrorMode Sets whether to decode mirrored barcodes.
ModuleSizeRangeArray Sets the range of module size (in pixels) for barcodes searching.
MSICodeCheckDigitCalculation Sets the scheme used for calculating a check digit of an MSI barcode.
Pages Sets the specific pages or the range of pages of a file (.tiff or .pdf) for barcode searching.
PartitionModes Sets the mode used to apply partition process.
PDFRasterDPI Sets the output image resolution.
PDFReadingMode Sets the way to detect barcodes from a PDF file when using the DecodeFile method.
Region Sets the region for barcodes searching.
RegionPredetectionModes Sets the region pre-detection mode for barcodes searching.
RequireStartStopChars Sets whether the start and stop characters are required when searching for Code 39 barcodes.
ResultCoordinateType Specifies the format for the coordinates returned
ReturnBarcodeZoneClarity Sets whether or not to return the clarity of the barcode zone.
ReturnPartialBarcodeValue Sets whether or not to return partial barcode value(s). Not support yet.
ScaleDownThreshold Sets the threshold for the image shrinking.
ScaleUpModes Sets the mode and priority to control the sampling methods of scale-up for linear barcodes with small module sizes.
StandardFormat Sets the standard barcode format.
TailModuleRatio Sets the module count and module size ratio of the barcode tail part.
TerminatePhase Sets the phase where the algorithm stops.
TextFilterModes Sets the mode and priority for text filter.
TextureDetectionModes Sets the mode and priority for texture detection.
TextResultOrderModes Sets the mode and priority for the order of the text results returned.
Timeout Sets the maximum amount of time (in milliseconds) that should be spent searching for a barcode per page.
VerifyCheckDigit Sets the value determining whether to verify the check digit in barcodes where this check digit is optional.

This page is compatible for:

Version 7.5.0

Is this page helpful?

YesYes NoNo

latest version

  • Latest version
  • Version 9.0.0
  • Version 8.9.3
  • Version 8.9.0
  • Version 8.8.7
  • Version 8.8.5
  • Version 8.8.3
  • Version 8.8.0
  • Version 8.6.3
  • Version 8.6.1
  • Version 8.6.0
  • Version 8.4.0
  • Version 8.2.5
  • Version 8.2.3
  • Version 8.2.1
  • Version 8.2.0
  • Version 8.1.3
  • Version 8.1.2
  • Version 8.1.0
  • Version 8.0.0
  • Version 7.6.0
  • Version 7.5.0
Change +
© 2003–2022 Dynamsoft. All rights reserved.
Privacy Statement / Site Map / Home / Purchase / Support