Parameter reference - Advanced Settings parameters
The following parameters are advanced parameters for special usages. These parameters can be uploaded via method updateAdvancedSettingsFromFile
and updateAdvancedSettingsFromString
.
Parameter Name | Type | Description |
---|---|---|
focalLength |
float | Set the fixed focal length. |
autoFocusInterval |
int | Set the time interval of the auto focus. |
autoFocusTerminateTime |
int | Set the minimum terminate time of auto focus. |
sensorControlSensitivity |
int | Set the sensitivity of the mobile sensor. |
focalLength
Set the fixed focal length with a float value. When this parameter is configured, the other focus methods and parameters will be disbaled and the focal length will be fixed. Users can reset the focalLength to -1 to disable the fixed focus settings. The closer to the 0, the further the focalLength will be.
Default Value
-1
Range
Android: -1 or float value between 0 and 10.
iOS: -1 or float value between 0 and 1.
autoFocusInterval
Set the time interval of the auto-focus with an int value.
Default Value
The default focus interval is 3000 milliseconds which means the camera will focus once for every 3 seconds.
Range
At least 0 and no maximum limit.
autoFocusTerminateTime
The minimum termination time of the auto-focus with an int value.
Default Value
The default terminates time is 3000 milliseconds which means the camera will never focus for another time with in 500 miliseconds.
Range
At least 0 and no maximum limit.
sensorControlSensitivity
Set the sensitivity of the mobile sensor with an int value. A lower input value results in a higher sensitivity.
Default Value
50
Range
At least 0 and no maximum limit.