Dev Center
Table of contents

Thanks for downloading Dynamsoft Barcode Reader Package!

Your download will start shortly. If your download does not begin, click here to retry.

Parameter Mode Enumeration

Enumeration Description
AccompanyingTextRecognitionMode Describes the accompanying text recognition mode.
BarcodeColourMode Describes the barcode colour mode.
BarcodeComplementMode Describes the barcode complement mode.
BinarizationMode Describes the binarization mode.
ColourClusteringMode Describes the colour clustering mode.
ColourConversionMode Describes the colour conversion mode.
ConflictMode Describes the conflict mode.
DeformationResistingMode Describes the deformation resisting mode.
DPMCodeReadingMode Describes the DPM code reading mode.
GrayscaleTransformationMode Describes the grayscale transformation mode.
ImagePreprocessingMode Describes the image preprocessing mode.
LocalizationMode Describes the localization mode.
PDFReadingMode Describes the PDF reading mode.
RegionPredetectionMode Describes the region predetection mode.
ScaleUpMode Describes the scale up mode.
TerminatePhase Describes the terminate phase.
TextAssistedCorrectionMode Describes the text assisted correction mode.
TextFilterMode Describes the text filter mode.
TextureDetectionMode Describes the texture detection mode.

AccompanyingTextRecognitionMode

Describes the accompanying text recognition mode.

Declarations

enum Dynamsoft.Barcode.EnumAccompanyingTextRecognitionMode

Members

Member Value Description
ATRM_SKIP 0x00 Skips the accompanying text recognition.
ATRM_GENERAL 0x01 Recognizes accompanying texts using the general algorithm. Check arguments of AccompanyingTextRecognitionModes for available argument settings.

BarcodeColourMode

Describes the barcode colour mode.

Declarations

enum Dynamsoft.Barcode.EnumBarcodeColourMode

Members

Member Value Description
BICM_SKIP 0x00 Skips the barcode colour operation.
BICM_DARK_ON_LIGHT 0x01 Dark items on a light background. Check arguments of BarcodeColourModes for available argument settings.
BICM_LIGHT_ON_DARK 0x02 Light items on a dark background. Not supported yet. Check arguments of BarcodeColourModes for available argument settings.
BICM_DARK_ON_DARK 0x04 Dark items on a dark background. Not supported yet. Check arguments of BarcodeColourModes for available argument settings.
BICM_LIGHT_ON_LIGHT 0x08 Light items on a light background. Not supported yet. Check arguments of BarcodeColourModes for available argument settings.
BICM_DARK_LIGHT_MIXED 0x10 The background is mixed by dark and light. Not supported yet. Check arguments of BarcodeColourModes for available argument settings.
BICM_DARK_ON_LIGHT_DARK_SURROUNDING 0x20 Dark item on a light background surrounded by dark. Check arguments of BarcodeColourModes for available argument settings.

BarcodeComplementMode

Describes the barcode complement mode.

Declarations

enum Dynamsoft.Barcode.EnumBarcodeComplementMode

Members

Member Value Description
BCM_SKIP 0x00 Skips the barcode complement.
BCM_AUTO 0x01 Not supported yet.
BCM_GENERAL 0x02 Complements the barcode using the general algorithm.

BinarizationMode

Describes the binarization mode.

Declarations

enum Dynamsoft.Barcode.EnumBinarizationMode

Members

Member Value Description
BM_SKIP 0x00 Skips the binarization.
BM_AUTO 0x01 Not supported yet.
BM_LOCAL_BLOCK 0x02 Binarizes the image based on the local block. Check arguments of BinarizationModes for available argument settings.

ColourClusteringMode

Describes the colour clustering mode.

Declarations

enum Dynamsoft.Barcode.EnumColourClusteringMode

Members

Member Value Description
CCM_SKIP 0x00 Skips the colour clustering.
CCM_AUTO 0x01 Not supported yet.
CCM_GENERAL_HSV 0x02 Clusters colours using the general algorithm based on HSV. Check arguments of ColourClusteringModes for available argument settings.

ColourConversionMode

Describes the colour conversion mode.

Declarations

enum Dynamsoft.Barcode.EnumColourConversionMode

Members

Member Value Description
CICM_SKIP 0x00 Skip the colour conversion.
CICM_GENERAL 0x01 Converts a colour image to a grayscale image using the general algorithm. Check arguments of ColourConversionModes for available argument settings.

ConflictMode

Describes the conflict mode.

Declarations

enum Dynamsoft.Barcode.EnumConflictMode

Members

Member Value Description
CM_IGNORE 0x01 Ignores new settings and inherits the previous settings.
CM_OVERWRITE 0x02 Overwrites the old settings with new settings.

DeformationResistingMode

Describes the deformation resisting mode.

Declarations

enum Dynamsoft.Barcode.EnumDeformationResistingMode

Members

Member Value Description
DRM_SKIP 0x00 Skip the deformation resisting.
DRM_AUTO 0x01 Not supported yet.
DRM_GENERAL 0x02 Resists deformation using the general algorithm. Check arguments of DeformationResistingModes for available argument settings.

DPMCodeReadingMode

Describes the DPM code reading mode.

Declarations

enum Dynamsoft.Barcode.EnumDPMCodeReadingMode

Members

Member Value Description
DPMCRM_SKIP 0x00 Skip the DPM code reading.
DPMCRM_AUTO 0x01 Not supported yet.
DPMCRM_GENERAL 0x02 Reads DPM code using the general algorithm.

GrayscaleTransformationMode

Describes the grayscale transformation mode.

Declarations

enum Dynamsoft.Barcode.EnumGrayscaleTransformationMode

Members

Member Value Description
GTM_SKIP 0x00 Skips grayscale transformation.
GTM_INVERTED 0x01 Transforms to inverted grayscale. Recommended for light on dark images.
GTM_ORIGINAL 0x02 Keeps the original grayscale. Recommended for dark on light images.

ImagePreprocessingMode

Describes the image preprocessing mode.

Declarations

enum Dynamsoft.Barcode.EnumImagePreprocessingMode

Members

Member Value Description
IPM_SKIP 0x00 Skips image preprocessing.
IPM_AUTO 0x01 Not supported yet.
IPM_GENERAL 0x02 Takes the unpreprocessed image for following operations.
IPM_GRAY_EQUALIZE 0x04 Preprocesses the image using the gray equalization algorithm. Check arguments of ImagePreprocessingModes for available argument settings.
IPM_GRAY_SMOOTH 0x08 Preprocesses the image using the gray smoothing algorithm. Check arguments of ImagePreprocessingModes for available argument settings.
IPM_SHARPEN_SMOOTH 0x10 Preprocesses the image using the sharpening and smoothing algorithm. Check arguments of ImagePreprocessingModes for available argument settings.
IPM_MORPHOLOGY 0x20 Preprocesses the image using the morphology algorithm. Check arguments of ImagePreprocessingModes for available argument settings.

LocalizationMode

Describes the localization mode.

Declarations

enum Dynamsoft.Barcode.EnumLocalizationMode

Members

Member Value Description
LM_SKIP 0x00 Skips localization.
LM_AUTO 0x01 Not supported yet.
LM_CONNECTED_BLOCKS 0x02 Localizes barcodes by searching for connected blocks. This algorithm usually gives best result and it is recommended to set ConnectedBlocks to the highest priority.
LM_STATISTICS 0x04 Localizes barcodes by groups of contiguous black-white regions. This is optimized for QRCode and DataMatrix.
LM_LINES 0x08 Localizes barcodes by searching for groups of lines. This is optimized for 1D and PDF417 barcodes.
LM_SCAN_DIRECTLY 0x10 Localizes barcodes quickly. This mode is recommended in interactive scenario. Check arguments of LocalizationModes for available argument settings.
LM_STATISTICS_MARKS 0x20 Localizes barcodes by groups of marks.This is optimized for DPM codes.
LM_STATISTICS_POSTAL_CODE 0x40 Localizes barcodes by groups of connected blocks and lines.This is optimized for postal codes.

PDFReadingMode

Describes the PDF reading mode.

Declarations

enum Dynamsoft.Barcode.EnumPDFReadingMode

Members

Member Value Description
PDFRM_AUTO 0x01 Lets the library choose the reading mode automatically.
PDFRM_VECTOR 0x02 Detects barcode from vector data in PDF file.
PDFRM_RASTER 0x04 Converts the PDF file to image(s) first, then perform barcode recognition.

RegionPredetectionMode

Describes the region predetection mode.

Declarations

enum Dynamsoft.Barcode.EnumRegionPredetectionMode

Members

Member Value Description
RPM_SKIP 0x00 Skips region detection.
RPM_AUTO 0x01 Lets the library choose an algorithm automatically to detect region.
RPM_GENERAL 0x02 Takes the whole image as a region.
RPM_GENERAL_RGB_CONTRAST 0x04 Detects region using the general algorithm based on RGB colour contrast. Check arguments of RegionPredetectionModes for available argument settings.
RPM_GENERAL_GRAY_CONTRAST 0x08 Detects region using the general algorithm based on gray contrast. Check arguments of RegionPredetectionModes for available argument settings.
RPM_GENERAL_HSV_CONTRAST 0x10 Detects region using the general algorithm based on HSV colour contrast. Check arguments of RegionPredetectionModes for available argument settings.

ScaleUpMode

Describes the scale up mode.

Declarations

enum Dynamsoft.Barcode.EnumScaleUpMode

Members

Member Value Description
SUM_SKIP 0x00 Skip the scale-up process.
SUM_AUTO 0x01 The library chooses an interpolation method automatically to scale up.
SUM_LINEAR_INTERPOLATION 0x02 Scales up using the linear interpolation method. Check arguments of ScaleUpModes for available argument settings.
SUM_NEAREST_NEIGHBOUR_INTERPOLATION 0x04 Scales up using the nearest-neighbour interpolation method. Check arguments of ScaleUpModes for available argument settings.

TerminatePhase

Describes the terminate phase.

Declarations

enum Dynamsoft.Barcode.EnumTerminatePhase

Members

Member Value Description
TP_REGION_PREDETECTED 0x01 Exits the barcode reading algorithm after the region predetection is done.
TP_IMAGE_PREPROCESSED 0x02 Exits the barcode reading algorithm after the region predetection and image pre-processing is done.
TP_IMAGE_BINARIZED 0x04 Exits the barcode reading algorithm after the region predetection, image pre-processing, and image binarization are done.
TP_BARCODE_LOCALIZED 0x08 Exits the barcode reading algorithm after the region predetection, image pre-processing, image binarization, and barcode localization are done.
TP_BARCODE_TYPE_DETERMINED 0x10 Exits the barcode reading algorithm after the region predetection, image pre-processing, image binarization, barcode localization, and barcode type determining are done.
TP_BARCODE_RECOGNIZED 0x20 Exits the barcode reading algorithm after the region predetection, image pre-processing, image binarization, barcode localization, barcode type determining, and barcode recognition are done.

TextAssistedCorrectionMode

Describes the text assisted correction mode.

Declarations

enum Dynamsoft.Barcode.EnumTextAssistedCorrectionMode

Members

Member Value Description
TACM_SKIP 0x00 Skips the text assisted correction.
TACM_AUTO 0x01 Not supported yet.
TACM_VERIFYING 0x02 Uses the accompanying text to verify the decoded barcode result. Check arguments of TextAssistedCorrectionMode for available argument settings.
TACM_VERIFYING_PATCHING 0x04 Uses the accompanying text to verify and patch the decoded barcode result. Check arguments of TextAssistedCorrectionMode for available argument settings.

TextFilterMode

Describes the text filter mode.

Declarations

enum Dynamsoft.Barcode.EnumTextFilterMode

Members

Member Value Description
TFM_SKIP 0x00 Skip the text filtering.
TFM_AUTO 0x01 Not supported yet.
TFM_GENERAL_CONTOUR 0x02 Filters text using the general algorithm based on contour. Check arguments of TextFilterModes for available argument settings.

TextureDetectionMode

Describes the texture detection mode.

Declarations

enum Dynamsoft.Barcode.EnumTextureDetectionMode

Members

Member Value Description
TDM_SKIP 0x00 Skips texture detection.
TDM_AUTO 0x01 Not supported yet.
TDM_GENERAL_WIDTH_CONCENTRATION 0x02 Detects texture using the general algorithm. Check arguments of TextureDetectionModes for available argument settings.

This page is compatible for:

Version 7.5.0

Is this page helpful?

YesYes NoNo

In this article:

version 7.6.0

  • Latest version
  • Version 10.x
    • Version 10.0.20
    • Version 10.0.10
    • Version 10.0.0
  • Version 9.x
    • Version 9.6.30
    • Version 9.6.20
    • Version 9.6.10
    • Version 9.6.0
    • Version 9.4.0
    • Version 9.2.0
    • Version 9.0.0
  • Version 8.x
    • Version 8.8.0
    • Version 8.6.0
    • Version 8.4.0
    • Version 8.2.0
    • Version 8.1.2
    • Version 8.1.0
    • Version 8.0.0
  • Version 7.x
    • Version 7.6.0
    • Version 7.5.0
Change +